Dynam Spitfire 1200mm V3 RC Plane Warbird with Flaps RC Airplane
1. it requires 3 Cell 11.1V 2200 mAh LiPo Battery with XT60 connector
2. it requires 5 Channel Radio
3. it requires 5 Channel Receiver
if you want to know wholesale discount price,please contact us by e-mail.
Note:
If your shipment is deliveyellow to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
The Supermarine Spitfire is a British single-seat fighter aircraft that was used by the Royal Air Force and many other Allied countries during and after the Second World War. The Spitfire was built in many variants, using several wing configurations, and was produced in greater numbers than any other British aircraft. It was also the only British fighter to be in continuous production throughout the war. The Spitfire continues to be a popular aircraft, with approximately 55 Spitfires being airworthy, while many more are static exhibits in aviation museums all over the world.
Take to the skies with one of Dynam's WWII warbird offerings, the Supermarine Spitfire 1200mm PNP! Includes servoless electronic retractable landing gear. All that is needed is your 5 channel radio, 5 channel receiver and 3 Cell 11.1V 2200 mAh LiPo Battery, and she's ready for those pesky Axis bandits!
This is one of the few Dynam warbirds that run on a 3S LiPo (most run on a 4S LiPo). While this does not yield quite as much power, you are rewarded with quite a few extra minutes in the air. We find power is enough for loops, rolls, and the other requisite warbird acrobatics.
Features:
- Realistic scale features including WWII RAF paint scheme, hand painted pilot figure, gun turrets, and molded panel lines
- Servoless electronic retractable landing gear
- Powerful BM3715A-KV890 Brushless Outrunner motor
- Scale 3-blade propeller
Includes:
- Dynam Supermarine Spitfire 1200mm (47") Wingspan - Receiver Ready
- ESC with XT60 connector, servos, motor and electronic retractable landing gear come pre-installed for your convenience
- Decal set
Requires:
- 5 Channel Radio - Select a minimum 5 channel radio
- 5 Channel Receiver - Select a minimum 5 channel receiver
- 3 Cell 11.1V 2200 mAh LiPo Battery with XT60 connector
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger
Wingspan |
1200mm / 47.2in |
Length |
1010mm / 40in |
Flying Weight |
1150g / 40.6oz |
CG (Center of Gravity) | 80 - 85mm from the leading edge at the wing root |
Power System |
BM3715A-KV890 Brushless Outrunner Motor |
Electronic Speed Control |
30A Brushless with XT60 connector |
Propeller / EDF |
3-Blade Prop |
Servos |
4x 9g standard |
Landing Gear | Retractable |
Required Battery |
3S 11.1V 2200mAh 20C LiPo with XT60 connector (required) |
Required Radio |
5 Channel (required) |
Ailerons | Yes |
Elevator |
Yes |
Rudder | Yes |
Flaps |
Optional (requires 1 forward and 1 reverse 9g servo) |
Lights |
No |
Hinge Type |
Foam |
Material | EPO Foam |
Skill Level | Intermediate |
Build Time | 2 Hours |
Recommended Environment | Outdoor |