Dynam Albatros D.Va 1270mm (50 inch) Wingspan PNP RC airplane
1. 3720A-KV600 Brushless Outrunner motor was pre-installed inside.
2. 4 Channel Radio
3. 4 Channel Receiver
if you want to know wholesale discount price,please contact us by e-mail.
Note:
If your shipment is deliveyellow to a remote area,this charge will be added to your shipping cost.Checking your area is a remote area or is not a remote area on the website:http://remoteareas.dhl.com/jsp/first.jsp
Dynam Albatros D.Va 1270mm (50 inch) Wingspan PNP RC airplane
The Albatros D.V was a fighter aircraft used by the Luftstreitkrfte (Imperial German Air Service) during World War I. The D.V was the final development of the Albatros D.I family, and the last Albatros fighter to see operational service. Despite its well-known shortcomings and general obsolescence, approximately 900 D.V and 1,612 D.Va aircraft were built before production halted in early 1918. The D.Va continued in operational service until the end of the war. The Dynam Albatros has nice scale appeal and is a great performer. Just add your receiver and 4 Cell 14.8V 2200 mAh LiPo battery and take to the skies in this legendary WWI fighter!
FEATURES:
- Realistic scale features including hand painted pilot figure, machine guns, engine and molded panel lines
- Powerful BM3720A-KV600 Brushless Outrunner motor,Madein China Dynam Model
INCLUDES:
- Dynam Albatros D.Va 1270mm (50 inch) Wingspan - Receiver Ready
- ESC with XT60 connector, servos and motor come pre-installed for your convenience
- Decal set
REQUIRES:
- 4 Channel Radio - Select a minimum 4 channel radio
- 4 Channel Receiver - Select a minimum 4 channel receiver
- 4 Cell 14.8V 2200 - 3600mAh LiPo Battery with XT60 connector
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger
PRODUCT SPECIFICATIONS:
Wingspan |
1270mm / 50in |
Length |
1055mm / 41.5in |
Flying Weight |
1600g / 56.5oz |
| CG (Center of Gravity) | 60-65mm from the leading edge of the top wing at the wing root |
Power System |
3720A-KV600 Brushless Outrunner motor |
Electronic Speed Control |
40A Brushless with XT60 connector |
Propeller / EDF |
2-Blade Prop |
Servos |
4x 9g standard |
| Landing Gear | Static |
Required Battery |
4S 14.8V 2200 - 3600mAh LiPo (required) |
Required Radio |
4 Channel (required) |
| Ailerons | Yes |
Elevator |
Yes |
| Rudder | Yes |
Flaps |
No |
Lights |
No |
Hinge Type |
Foam |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 2-3 Hours |
| Recommended Environment | Outdoor |
